Siemens extends RFID portfolio with compact reader for space-saving uses

• "UHF for Industry" algorithms secure operation in environments with poor radio signals
• New Simatic RF615R UHF reader with particularly compact design
• Connection to cloud environments via OPC UA interface and industrial IoT gateway

Siemens is extending its range of Simatic RF600 ultra-high frequency (UHF) devices to include a new RFID (Radio Frequency Identification) reader. The Simatic RF615R comes with a particularly compact design (133 x 155 x 45 millimeters), an internal, circularly polarized antenna and an additional external antenna connection.

New device series paves the way for high frequency RFID cloud connection

• Simatic RF18xC communication modules extend Simatic Ident portfolio
• Modular system integration for Profinet using standard function blocks
• Cloud connection via OPC UA interface and industrial IoT gateway
• Cost efficiency due to differentiated connection variants for readers

Siemens is extending its portfolio of Simatic Ident communication modules. The first devices of the new series to launch are the Simatic RF185C, RF186C and RF188C. Available options allow one, two or four readers to be connected and operated via Ethernet/Profinet, ensuring a match to the required number of readers.

Extended output and connected voltage variants for Sinamics S210

• Engineering and commissioning using Sizer and Start Drive, engineering in TIA Portal V15.1
• New shared DC link coupling reduces waste heat during braking and increases traversing cycle of individual axes
• Higher-level control now possible with Simatic ET 200SP CPUs and Open Controllers or Simatic S7-1500 Software Controllers
• First new frame size in 0.4 to one kilowatt output range

Siemens is extending its Sinamics S210 single-axis servo drive system for mid-range applications to include a number of additional output and connected voltage variants. In the first of the new frame sizes, the system is available with an output of 0.4 to one kilowatt with 3 AC 400 volts. The new Sinamics S210 device variants come with an optional busbar trunking system and a shared DC link coupling to enable their international application. The DC link coupling permits energy equalization during dynamic reversing operations by using the integrated braking resistor to reduce waste heat occurring during braking and increasing the traversing cycle of the individual axes. Alongside S7-1500 Advanced Controllers, higher-level control of the new devices is also possible using Simatic ET 200SP CPUs (Central Processing Units) and Open Controllers or Simatic S7-1500 Software Controllers, all of which are connected over time-synchronized Profinet IRT. The drive system can be simply engineered an

New device series paves the way for high frequency RFID cloud connection

• Simatic RF18xC communication modules extend Simatic Ident portfolio
• Modular system integration for Profinet using standard function blocks
• Cloud connection via OPC UA interface and industrial IoT gateway
• Cost efficiency due to differentiated connection variants for readers

Siemens is extending its portfolio of Simatic Ident communication modules. The first devices of the new series to launch are the Simatic RF185C, RF186C and RF188C. Available options allow one, two or four readers to be connected and operated via Ethernet/Profinet, ensuring a match to the required number of readers.

Extended output and connected voltage variants for Sinamics S210

• Engineering and commissioning using Sizer and Start Drive, engineering in TIA Portal V15.1
• New shared DC link coupling reduces waste heat during braking and increases traversing cycle of individual axes
• Higher-level control now possible with Simatic ET 200SP CPUs and Open Controllers or Simatic S7-1500 Software Controllers
• First new frame size in 0.4 to one kilowatt output range

Siemens is extending its Sinamics S210 single-axis servo drive system for mid-range applications to include a number of additional output and connected voltage variants. In the first of the new frame sizes, the system is available with an output of 0.4 to one kilowatt with 3 AC 400 volts. The new Sinamics S210 device variants come with an optional busbar trunking system and a shared DC link coupling to enable their international application. The DC link coupling permits energy equalization during dynamic reversing operations by using the integrated braking resistor to reduce waste heat occurring during braking and increasing the traversing cycle of the individual axes. Alongside S7-1500 Advanced Controllers, higher-level control of the new devices is also possible using Simatic ET 200SP CPUs (Central Processing Units) and Open Controllers or Simatic S7-1500 Software Controllers, all of which are connected over time-synchronized Profinet IRT. The drive system can be simply engineered an

New device series paves the way for high frequency RFID cloud connection

• Simatic RF18xC communication modules extend Simatic Ident portfolio
• Modular system integration for Profinet using standard function blocks
• Cloud connection via OPC UA interface and industrial IoT gateway
• Cost efficiency due to differentiated connection variants for readers

Siemens is extending its portfolio of Simatic Ident communication modules. The first devices of the new series to launch are the Simatic RF185C, RF186C and RF188C. Available options allow one, two or four readers to be connected and operated via Ethernet/Profinet, ensuring a match to the required number of readers.

Extended output and connected voltage variants for Sinamics S210

• Engineering and commissioning using Sizer and Start Drive, engineering in TIA Portal V15.1
• New shared DC link coupling reduces waste heat during braking and increases traversing cycle of individual axes
• Higher-level control now possible with Simatic ET 200SP CPUs and Open Controllers or Simatic S7-1500 Software Controllers
• First new frame size in 0.4 to one kilowatt output range

Siemens is extending its Sinamics S210 single-axis servo drive system for mid-range applications to include a number of additional output and connected voltage variants. In the first of the new frame sizes, the system is available with an output of 0.4 to one kilowatt with 3 AC 400 volts. The new Sinamics S210 device variants come with an optional busbar trunking system and a shared DC link coupling to enable their international application. The DC link coupling permits energy equalization during dynamic reversing operations by using the integrated braking resistor to reduce waste heat occurring during braking and increasing the traversing cycle of the individual axes. Alongside S7-1500 Advanced Controllers, higher-level control of the new devices is also possible using Simatic ET 200SP CPUs (Central Processing Units) and Open Controllers or Simatic S7-1500 Software Controllers, all of which are connected over time-synchronized Profinet IRT. The drive system can be simply engineered an

High-performance programming device with rugged hardware for mobile engineering

• Simatic Field PG M6: Ready-to-use, high-performance programming device for mobile engineering with the TIA Portal
• Preinstalled engineering software and integrated automation interfaces
• Light, rugged and completely shielded device for use in machines and plants in a harsh industrial environment
• Equipment and performance graduated in Advanced and Comfort versions

The latest generation of ready-to-use, high-performance programming devices from Siemens has been optimized for engineering with the TIA Portal and designed for mobile use in machines and plants for configuration, commissioning, service, and maintenance. The new Simatic Field PG M6 programming device, with a stylish silver housing cover and M6 inscription, is equipped with a high-speed DDR4 work memory of up to 32 GB and an impact-resistant SSD mass storage device of up to 2 TB. Thanks to the light, rugged and completely shielded magnesium housing, the semi-ruggedized device is suitable for use in harsh industrial environments. Additionally, bumpers on exposed parts of the housing protect against shocks and vibrations.

Flexible KS adapter links Simogear gear units to different servomotors

• Flexible-use adapter for simplified handling
• New Simogear coupling adapter for Simotics servomotors
• KS adapter reduces downtimes, optimizes stock keeping and is suited for high-precision applications

Siemens has launched a new coupling adapter for linking Simogear gear units to Siemens servomotors. As the flexible new solution can connect different gear unit types to different servomotors rather than using a separate dedicated adapter for each motor, the new solution radically simplifies handling.

High-performance programming device with rugged hardware for mobile engineering

• Simatic Field PG M6: Ready-to-use, high-performance programming device for mobile engineering with the TIA Portal
• Preinstalled engineering software and integrated automation interfaces
• Light, rugged and completely shielded device for use in machines and plants in a harsh industrial environment
• Equipment and performance graduated in Advanced and Comfort versions

The latest generation of ready-to-use, high-performance programming devices from Siemens has been optimized for engineering with the TIA Portal and designed for mobile use in machines and plants for configuration, commissioning, service, and maintenance. The new Simatic Field PG M6 programming device, with a stylish silver housing cover and M6 inscription, is equipped with a high-speed DDR4 work memory of up to 32 GB and an impact-resistant SSD mass storage device of up to 2 TB. Thanks to the light, rugged and completely shielded magnesium housing, the semi-ruggedized device is suitable for use in harsh industrial environments. Additionally, bumpers on exposed parts of the housing protect against shocks and vibrations.