MEDIUM POWERTRAIN DESIGNER FLUID SYSTEM - TURIN

Design know how in the following areas:

KEY RESPONSIBILIES

• Design of components and systems in NX 11 Powertrain areas
• Expertise in tools TcAE
• Knowledge of engine system
• Knowledge of ASME (GD&T)
• Work out design studies and design alternatives

SKILLS

• Medium: 3 years’ experience, minimum, as per requirements
• English language: autonomous in written communication.

DELIVERABLES

3D LAYOUT STUDIES

3D detailed study of subsystems and component.
The components models have to be developed to be ready as input for the detailed and finalized models. Where not needed is accepted to avoid:
• Fillets
• Drafts
• Internal cavity and channels
The architecture of the engine must be completely defined. Main engine dimensions and the position of all accessories, circuits and auxiliaries must be fully defined. The model has to be suitable for:
• Weight assessment, center of gravity and inertia moments
• Vehicle integration study

FINALIZED MODELS

3D detailed and finalized models of all components, suitable for:
• Analysis mesh O Component building
• 2D drawings execution
• DMU build up
All the models must be completed by rounds, drafts, split lines, cavities and channels, ready to be machined.

DRAWINGS

• Creation of “2D draft drawings”, when needed, to be attached to Component SOR
• Creation of 2D detailed drawings for all engine components, following GM Standards and Rules
• ASME standard for geometry dimensioning and tolerance will be used

RECORD & RELEASE

• Production/prototype part lists creation, using GM tools
• Support to project meetings
• Support to DRE/DSE

Name *

Surname *

Email *

Role *

Location *

Note

Upload CV*

captcha

Ho Letto l'Informativa sulla Privacy ed Accetto le Condizioni

SENIOR POWERTRAIN DESIGNER FLUID SYSTEM - TURIN

Design know how in the following areas:

KEY RESPONSIBILIES

• Design of components and systems in NX 11 Powertrain areas
• Expertise in tools TcAE
• Knowledge of engine system
• Knowledge of ASME (GD&T)
• Work out design studies and design alternatives

SKILLS

• Senior: 5 years experience, minimum, as per requirements
• English language: autonomous in written communication.

DELIVERABLES

3D LAYOUT STUDIES

3D detailed study of subsystems and component.
The components models have to be developed to be ready as input for the detailed and finalized models. Where not needed is accepted to avoid:
• Fillets
• Drafts
• Internal cavity and channels
The architecture of the engine must be completely defined. Main engine dimensions and the position of all accessories, circuits and auxiliaries must be fully defined. The model has to be suitable for:
• Weight assessment, center of gravity and inertia moments
• Vehicle integration study

FINALIZED MODELS

3D detailed and finalized models of all components, suitable for:
• Analysis mesh O Component building
• 2D drawings execution
• DMU build up
All the models must be completed by rounds, drafts, split lines, cavities and channels, ready to be machined.

DRAWINGS

• Creation of “2D draft drawings”, when needed, to be attached to Component SOR
• Creation of 2D detailed drawings for all engine components, following GM Standards and Rules
• ASME standard for geometry dimensioning and tolerance will be used

RECORD & RELEASE

• Production/prototype part lists creation, using GM tools
• Support to project meetings
• Support to DRE/DSE

Name *

Surname *

Email *

Role *

Location *

Note

Upload CV*

captcha

Ho Letto l'Informativa sulla Privacy ed Accetto le Condizioni

STRESS ANALYST SENIOR ENGINEER

Requisiti: Laurea in Ingegneria Meccanica o Aerospaziale, esperienza precedente nella mansione di almeno 3-5 anni presso aziende aeronautiche o automotive;
Ottima conoscenza delle metodologie di analisi statica, buona conscenza dell’analisi a fatica e di problematiche di damage tolerance;
Utilizzo degli applicativi Nastran, Patran e Hypermesh;
Ottima conoscenza della lingua inglese.
Completano il profilo spiccate doti motivazionali, dinamismo, attitudine al Problem Solving, tolleranza allo stress, capacità di Leadership, orientamento al raggiungimento degli obiettivi e buona predisposizione ai rapporti interpersonali. un’elevata attitudine al lavoro in team, doti di precisione, flessibilità mentale e capacità proattiva nella gestione delle problematiche professionali.
E’ richiesta la disponibilità a trasferte. Assunzione diretta da parte dell’azienda e inserimento in un contesto dinamico e in forte sviluppo. Inquadramento e retribuzione saranno commisurate alle reali esperienze maturate.
La selezione avverrà direttamente a cura dell’azienda con interviste e colloqui individuali.

Ai sensi della normativa vigente l’offerta si intende estesa ad entrambe i sessi (L903/77).

Nome *

Cognome *

Email *

Ruolo *

Città *

Note

Upload CV*

captcha

Dichiaro di aver letto e accettato la privacy policy

NVH TEST ENGINEER

Since our establishment in 1999, Daca-I people are always on their way to grow. Now we are becoming a consultant company with strong competence in different industries including automotive, aviation, mechanical engineering and automation of package. Thanks to close collaboration with our customers and academic institutes, we are able to provide high-quality service and in the meantime gain knowledge and responsibility to keep creative and initiative.
Automotive NVH Department is one of our departments grow fastest. We have been working with the privilege Italian OEM and helping them to improve the NVH quality of their products, including powertrain, suspension and steering.

JOB SUMMARY
You will join our Automotive NVH Department and focus on NVH testing activity about powertrain products. You will be responsible for improving NVH quality of our customer’s product, achieve the target of quality improvement, and cost reduction. In the meantime, you will work closely with our other colleagues to optimize the test methodology and data post-processing technics.

RESPONSABILITIES AND DUTIES
–        Subjective evaluation of powertrain NVH performance on vehicle
–        Vehicle NVH test execution based on customer’s standard
–        Use signal acquisition system to record NVH phenomenon and process data with the mean of our methodology
–        Elaborate vehicle test report for limit definition, troubleshooting and quality check
–        Monitor End-Of-Line test bench result to check NVH performance of production
–        Assist customer for quality issue analysis, including bench data analysis, vehicle test and its data post processing/Analysis.

QUALIFICATIONS AND SKILLS
–        Passion for vehicle and new technology
–        Degree in engineering is a must, mechanical and automotive engineering preferred
–        proficient English is a must
–        Previous experience in automotive powertrain is preferred
–        Knowledge about NVH is preferred
–        Previous experience with signal acquisition system is preferred, e.g. Test Lab, Head Acoustic and INCA
–        Teamwork spirit, result orientation and sociability

WHAT WE OFFER
–        You will get tutor for planning your personalized career path
–        You will experience fast knowledge updating
–        You will gain know-how together with customer

LOCATION 
Turin – Naples – Biella

Ai sensi della normativa vigente l’offerta si intende estesa ad entrambe i sessi (L903/77).

Name *

Surname *

Email *

Role *

Location *

Note

Upload CV*

captcha

Dichiaro di aver letto e accettato la privacy policy

TEST ENGINEER JUNIOR

Requisiti: Laurea in Ingegneria Meccanica o Elettronica.

Ottima conoscenza della lingua inglese.

Completano il profilo spiccate doti motivazionali, dinamismo, attitudine al Problem Solving, tolleranza allo stress, capacità di Leadership, orientamento al raggiungimento degli obiettivi e buona predisposizione ai rapporti interpersonali. un’elevata attitudine al lavoro in team, doti di precisione, flessibilità mentale e capacità proattiva nella gestione delle problematiche professionali.
La selezione avverrà direttamente a cura dell’azienda con interviste e colloqui individuali.

Ai sensi della normativa vigente l’offerta si intende estesa ad entrambe i sessi (L903/77).

Nome *

Cognome *

Email *

Ruolo *

Città *

Note

Upload CV*

captcha

Ho Letto l'Informativa sulla Privacy ed Accetto le Condizioni

NVH SHIFTABILITY ENGINEER

Since our establishment in 1999, Daca-I people are always on their way to grow. Now we are becoming a consultant company with strong competence in different industries including automotive, aviation, mechanical engineering and automation of package. Thanks to close collaboration with our customers and academic institutes, we are able to provide high-quality service and in the meantime gain knowledge and responsibility to keep creative and initiative.
Automotive NVH Department is one of our departments grow fastest. We have been working with the privilege Italian OEM and helping them to improve the NVH quality of their products, including powertrain, suspension and steering.

JOB SUMMARY
You will join our Automotive NVH Department and focus on NVH testing activity about powertrain products. You will be responsible for improving NVH quality of our customer’s product, achieve the target of quality improvement, and cost reduction. In the meantime, you will work closely with our other colleagues to optimize the test methodology and data post-processing technics.

RESPONSABILITIES AND DUTIE

 

  • Subjective evaluation of powertrain NVH performance on vehicle
  • Vehicle NVH test execution based on customer’s standard
  • Use signal acquisition system to record NVH phenomenon and process data with the mean of our methodology
  • Familiar with automobile and transmission structure and principle area knowledge, master the test standard and specification;
  • Knowledge about transmission for MT (FWD, RWD, AWD);
  • Knowledge about gears and synchronizer functionality;
  • Knowledge about measurement equipments and the function;

QUALIFICATIONS AND SKILLS

  • Master > 1 year working experience; Bachelor > 2 years working experience
  • Passion for vehicle and new technology
  • Degree in engineering is a must, mechanical and automotive engineering preferred
    proficient English is a must
  • Previous experience in automotive powertrain is preferred
  • Knowledge about NVH is preferred
  • Previous experience with signal acquisition system is preferred, e.g. Test Lab.
  • Teamwork spirit, result orientation and sociability

Name *

Surname *

Email *

Role *

Location *

Note

Upload CV*

captcha

Ho Letto l'Informativa sulla Privacy ed Accetto le Condizioni

NVH SHIFTABILITY EXPERT

Since our establishment in 1999, Daca-I people are always on their way to grow. Now we are becoming a consultant company with strong competence in different industries including automotive, aviation, mechanical engineering and automation of package. Thanks to close collaboration with our customers and academic institutes, we are able to provide high-quality service and in the meantime gain knowledge and responsibility to keep creative and initiative.
Automotive NVH Department is one of our departments grow fastest. We have been working with the privilege Italian OEM and helping them to improve the NVH quality of their products, including powertrain, suspension and steering.

JOB SUMMARY
You will join our Automotive NVH Department and focus on NVH testing activity about powertrain products. You will be responsible for improving NVH quality of our customer’s product, achieve the target of quality improvement, and cost reduction. In the meantime, you will work closely with our other colleagues to optimize the test methodology and data post-processing technics.

RESPONSABILITIES AND DUTIE

 

  • Subjective evaluation of powertrain NVH performance on vehicle
  • Vehicle NVH test execution based on customer’s standard
  • Use signal acquisition system to record NVH phenomenon and process data with the mean of our methodology
  • Familiar with automobile and transmission structure and principle area knowledge, master the test standard and specification;
  • Knowledge about transmission for MT (FWD, RWD, AWD);
  • Knowledge about gears and synchronizer functionality;
  • Knowledge about measurement equipments and the function;

QUALIFICATIONS AND SKILLS

  • Master > 4 year working experience; Bachelor > 5 years working experience
  • Passion for vehicle and new technology
  • Degree in engineering is a must, mechanical and automotive engineering preferred
    proficient English is a must
  • Previous experience in automotive powertrain is preferred
  • Knowledge about NVH is preferred
  • Previous experience with signal acquisition system is preferred, e.g. Test Lab.
  • Teamwork spirit, result orientation and sociability

Name *

Surname *

Email *

Role *

Location *

Note

Upload CV*

captcha

Ho Letto l'Informativa sulla Privacy ed Accetto le Condizioni